In this article we will tell you about the main stages of a major renovation in your house, apartment or just in room.
So, how better to start the renovation of the house?
It is necessary to start the house renovation with the reflection and visualization of the design of all the rooms. In case you are not satisfied with the layout and you want to tear down a few walls, or on the contrary to build a new, then you should start with this. Then buy everything you need to start repairs and all which will be necessary for you in the process of repairs. If you want to have the whole object repair was performed in the same style, you can seek the assistance of a designer, the designer would certainly will help to realize all your dreams come true.
Where to start repair: First stage.
At this point you provide dismantle: wash off whitewashing from the ceiling, take off the wallpaper on the walls, tiles, decorative plaster, plasterboard constructions. It is better not to touch the floor, so all the dust has settled on it, and the new floor will remain unscathed. In case the new laminate or parquet floor have already set ( as you know it requires special care), cover it with a oilcloth and a glue it up with masking tape around the perimeter and then place the cardboard on the floor, it is stronger than paper and thicker, thus the laminate is less affected by mechanical damage. Windows and doors are better left in their places, because at the end of the repair a new doors and windows may be very dirty and dusty.
Where to start repair: The second stage.
Breaking the walls for wiring and communications. Such work must be performed in the first place, because it is the dirtiest. For this you need to think with accuracy where will be located the phone, the TV, how many rosettes you need, and in what areas. Then mark these places and start breaking the walls. Establish the wiring and embed the slots.
Where to start repair: The third stage.
This step is time-consuming, because here we are changing old windows for new and cover them from dust by using films and masking tape. Preparing walls. Align the walls, make the slopes: apply plaster to walls, putty and smooth out the walls.
Where to start repair: The fourth stage.
Start to finishing the ceiling: set it, apply the plaster. If you decide to do the suspended ceilings, install it only after paperhanging.
Where to start repair: The fifth stage.
Getting started the primer the ceiling and walls. The primer is a composition which connects the different smaller particles together, penetrating inside the surface, it makes the object more durable. If you have forgotten the surface primed or not, swipe on it : If anything left on your hand - you should primer, if no - everything is fine, go ahead. Once dry we paint ceiling.
Donald Young, professional designer and repairer with the information provided by http://www.eurosealwindows.com/ windows & doors company in Toronto describes you in details the basic stages of the repair at home.